Starting Lineup is my final project for ME103. Six foosball players, sand-cast in aluminum, sit on a rod between two wooden uprights, with a knurled aluminum handle at one end. Each player was cast with a name and a number. The goal was an object about meaning, experience and form: something to hold onto the people who matter most while living away from home. Foosball nods to playing soccer as a kid.
Starting Lineup
A tactile reminder of the people who matter most while living away from home.

Overview
Challenge
One good casting was not enough. The players would sit side by side, so all six had to match in shape, quality and finish. Early ram-ups showed sink, broken-off sections, incomplete fills and distorted shapes. After each failure I worked out what went wrong and changed the setup: the gating, where the names sat, the pattern's orientation, and finally a riser.
“Fabrication rewards persistence.”


Process
I cast the players three to a flask from a pattern with the gating built in, reviewing each ram-up before the next. Seven flasks gave 21 players. The castings were then milled apart, the handle was turned and knurled on the lathe, the frame was cut and oiled in the wood shop, and the players were sandblasted.
Sand casting
Seven flasks, three players each, adjusting gating, name placement and orientation, then adding a riser.
Machining
Milled the castings apart, then turned, drilled and knurled the aluminum handle on the lathe.
Frame and finish
Cut and shaped the wooden base and uprights, oiled the wood, and sandblasted the players.




Outcome
The finished piece lines up six matching players between two oiled wooden uprights, with a knurled aluminum handle at one end. Six of the 21 castings met the standard I was aiming for. The project taught me sand casting, turning, knurling, woodworking and finishing, and that the second half of a build can take almost as long as the first. Next time I would start earlier.
7
Flasks rammed up
21
Players cast
6
Castings in the final lineup
Memento